KEC-30G(MK2)

Digital Electronic Compass with GPS (Pitch and Roll Function)

Feature

  1. Low cost solution, High Accuracy Digital Compass
  2. KEC30G(MK2) also provides GPS information, Lon/Lat, SOG and COG
  3. Used with High Accuracy Onwa Marine Heading Sensor KA-GC9A, KA-GC05 or Hemisphere GPS Compass(V102 or V104s)
  4. Can Correct Magnetic Deviation Manually or Automatically
  5. Selectable output baud rate and intervals for heading information (HDT, HDM or HDG)
  6. Output of GPS and heading signal can be interfaced with other equipment on board.
  7. Waterproof and robust heading sensor suitable for outdoor marine condition.

Specifications

 General 

HEADING Sensor
KA-GC05
KA-GC9A
or Hemisphere GPS Compass(V102 or V104s)

 

 OUTPUT/INPUT(IEC61162-1) 

INPUT
2 x NMEA0183
a) Input sentences : GGA, GLL, GMS, GNS, GSA, GSV, RMC, VTG, HDT
b) Baudrate : auto scan up to 38400
c) Support heading/GPS sensor : KA-GC05, KA-GC9A and Hemisphere GPS Compass (V102 and V104s)
OUTPUT
2 x NMEA0183
Port 1 and Port 2(RS232) :
a) Output sentences : HDT, HDM and HDG (selectable) and RMC, GSA, GGA, VTG, ZDA (Fixed)
b) Heading Output interval selections : 25ms, 100ms, 200ms (default) and 1,000ms
c) Output baudrate selections : 4800 (default), 9600, 19200 and 38400 (selectable)

 

 Environmental Conditions 

Ambient Temperature
Display unit : -15 °C to +55 °C
Heading/GPS sensor unit : -25 °C to +70 °C (for KA-GC05 and KA-GC9A)
Humidity
93% ±3% on 40 °C
Waterproofing
Display unit : IPX5
Heading/GPS sensor unit : IPX7 (for KA-GC05 and KA-GC9A)

 

 Power Supply 

ELECTRICAL
10.5 – 40VDC
Protection
over-current, over-voltage, power transient and accidental reverse polarity protection

 

Heading Sensors

 

Dimensions