Forum Replies Created
- AuthorPosts
Hi Sir,
The VDO sentence is contain your own vessel data , it is let the plotter know your vessel information.
It is complete comply to NMEA0183 standard, you may check the NMEA0183 standard
It will not trigger CPA and TCPA alarm
I guess you have 2sets of gps system working ? one other gps except KS-200A ?
Which software you are using ?
Regards
Kelvin
Sorry we cannot provide the source code
Usually it is cause by the COM/USB apater compatible issue, please try another apater or purchase the LX-08A adapter from us
Hi Sir,
The programming software is auto scan COM port, please try relase all other COM port / USB , reboot the PC and try again.
The default AIS TX is on, not require to turn on.
Regards
Kelvin
We have a PC plotter software Diginav can read KChart
for inquiry and purchase, please contact us through email, thank you
Please try to update this firmware :
Update instruction here :
https://drive.google.com/open?id=1PlVbBo4wmnxF0AI3tvgFa6u78Phqo2-U
Please try to update this firmware :
Update instruction here :
https://drive.google.com/open?id=1PlVbBo4wmnxF0AI3tvgFa6u78Phqo2-U
Could you take some photo or video and send to [email protected] for explain the problem, thank you
Could you advise your current firmware version ?
1. Cannot rename Saved Track name
2. Can rename Route name
3. When transfer saved track to route, you can select the start point and end point, please refer to manual P25 – 27
https://drive.google.com/drive/folders/1LTveIrcaxU0HPbq6dJK7opwr68QqqJiB
Hi Amikeren, sorry both of them are not Onwa brand, you should ask their technical support instead.
If any question about Onwa, is welcome to post here
- AuthorPosts